The Chemical Performance Evaluation for Pour Point Depressant (PPD) Testing, X Oil Field, Vietnam

نویسندگان

چکیده

Pour Point Depressant (PPD) Testing are used extensively to modify the crystallinity of hard waxes and reduce natural pour point crude. The best PPD chemical dosage for crude oil treatment will be chosen based on laboratory test results to: Reduce oil; viscosity Improve rheological properties wax deposition rate pipeline restart pressure. performance evaluation PPD, proposed use at X Oil Field has been conducted in Crude Petroleum products Lab. following have determined blank sample (which is a mixture H1, H4 H5 samples with ratio 2.1:1.4:1.0) treated by (rundown sample): (for sample); Wax Appearance Temperature (WAT) Disappearance (WDT) Dynamic Viscosity samples); Yield Stress Rheometer samples) 100 mins, 1000 mins 02 days shut-in times; Deposition Rate Cold Finger samples; Restart Pressure Loop times.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Oil Extraction from Millet Seed – Chemical Evaluation of Extracted Oil

ABSTRACT: The object of this study is to extract the oil from millets and evaluate the chemical properties of the extracted oil. Commercial millet oil was obtained by cold solvent extraction adopting soxhlet procedure. Quantitative and qualitative tests concerned with the non-saponifiable matter, fatty acid composition, phosphorus content representing total phospholipids, refractive index, pero...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

assessment of the park- ang damage index for performance levels of rc moment resisting frames

چکیده هدف اصلی از طراحی لرزه ای تامین ایمنی جانی در هنگام وقوع زلزله و تعمیر پذیر بودن سازه خسارت دیده، پس از وقوع زلزله است. تجربه زلزله های اخیر نشان داده است که ساختمان های طراحی شده با آیین نامه های مبتنی بر نیرو از نظر محدود نمودن خسارت وارده بر سازه دقت لازم را ندارند. این امر سبب پیدایش نسل جدید آیین نامه های مبتنی بر عملکرد شده است. در این آیین نامه ها بر اساس تغییرشکل های غیرارتجاعی ...

15 صفحه اول

Field effect transistor nanobiosensors: State-of-the-art and key challenges as point of care testing devices

The existing health care systems focus on treating diseases rather than preventing them. Patients are generally not tested unless physiological symptoms are appeared. When they do get tested, the results often take several days and can be inconclusive if the disease is at an early stage. In order to facilitate the diagnostics process and make tests more readily available for patients, the conce...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Engineering and technology journal

سال: 2021

ISSN: ['2456-3358']

DOI: https://doi.org/10.47191/etj/v6i11.03