The Behavior of Electroless Gold Plating Baths Using Hydrazine Compound as Reducing Agent.
نویسندگان
چکیده
منابع مشابه
Copper electroless plating in weakly alkaline electrolytes using DMAB as a reducing agent for metallization on polymer films
Copper electroless plating at low pH (7–9) using dimethylamine borane complex as a reducing agent is studied electrochemically by linear sweep voltammetry, cyclic voltammetry and chronopotentiometry in full electrolytes. We find that the mixed potential theory is not applicable to the described system. We show that both the working potential and the rate-controlling mechanism are dependent on t...
متن کاملProlonging the Life of Electroless Nickel Plating Baths by Phosphite Removal
Electroless nickel plating baths have to be discarded when levels of phosphites build up and interfere with the plating process. OWMC funded research conducted at ORTECH International to determine whether phosphites could be removed from plating bath solution. The first attempt to do this by adsorption on flyash was unsuccessful. However, the use of calcium ion to precipitate calcium phosphite ...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملThe Root Cause of Black Pad Failure of Solder Joints with Electroless Ni/Immersion Gold Plating
This paper reports on a study of the reaction of solder with the electrolessnickel with immersion gold (ENIG) plating system, and the resulting interfacial structures. A focused-ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the ENIGplated pad with and without soldering. High-speed pull testing of solder joints was performed to expose the pad sur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Electronics Packaging
سال: 2002
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.5.72