The ballistic impact performance of nanocrystalline zirconia-toughened alumina (nZTA) and alumina ceramics

نویسندگان

چکیده

The ballistic impact performance of nanocrystalline zirconia-toughened alumina (nZTA) ceramics, comprising 15 wt% nano-yttria-stabilised zirconia in a sub-micron matrix, have been studied through depth penetration tests and compared to the results for monolithic alumina. resistance each material was evaluated by fitting against thickness ceramic targets. These show that, despite micro-Raman analysis nZTA confirming occurrence classic tetragonal-to-monoclinic phase transformation, ceramics provide no benefit with respects Analysis fragments generated using Cr3+/Al2O3 fluorescence spectroscopy shows that both experience similar amounts plastic deformation as function fragment size, finer (<150 ?m) exhibiting more than coarser (>150 ?m). are validated fracture surface observations subsurface dislocation SEM TEM respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses.

Mono-phase bio-ceramics (alumina and zirconia) are widely used as femoral heads in total hip replacements (THR) as an alternative to metal devices. Unfortunately, the orthopaedic community reports significant in-vivo failures. Material scientists are already familiar with composites like alumina zirconia. Since both are biocompatible, this could prove to be a new approach to implants. This pape...

متن کامل

Processing and Properties of Zirconia-Toughened Alumina Prepared by Gelcasting

Zirconia-toughened alumina (ZTA) using yttria-stabilised zirconia is a good option for ceramic-ceramic bearing couples for hip joint replacement. Gelcasting is a colloidal processing technique capable of producing complex products with a range of dimensions and materials by a relatively low-cost production process. Using gelcasting, ZTA samples were prepared, optimising the stages of fabricatio...

متن کامل

Microstructural Alterations in Alumina Ceramics Associated with Ballistic Impact Events

Surface topography and defect structures associated with ballistic impact in a commercial 94 percent alumina ceramic armor are described. Fracture surfaces were examined by scanning electron microscopy, augmenting previous replication electron fractography studies. Direct transmission electron microscopy was employed in characterizing defect structures in extracted fracture fragments on replica...

متن کامل

Slow-Crack-Growth Behavior of Zirconia-Toughened Alumina Ceramics Processed by Different Methods

A study of slow-crack propagation in zirconia-toughened alumina (ZTA) ceramics is presented. Different ZTA composites, using either unstabilized or yttria-stabilized zirconia, have been tested. The materials were prepared in the range 0–15 vol% ZrO2, using two processing methods: powder mixing and a modified colloidal route. Crack propagation tests have been conducted for crack velocities from ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of The European Ceramic Society

سال: 2021

ISSN: ['0955-2219', '1873-619X']

DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.09.068