The Aging Characteristics of Mg-4 wt%Zn Alloy

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microstructure and Aging Behavior of Nonflammable AZ91D Mg Alloy

Phase equilibria of AZ91D Mg alloys for nonflammable use, containing Ca and Y, were carried out by using FactSage® and FTLite database, which revealed that solid solution treatment could be performed at temperatures from 400 to 450C. Solid solution treatment of AZ91D Mg alloy without Ca and Y was successfully conducted at 420C and supersaturated microstructure with all beta phase resolved into ...

متن کامل

Effect of Aging Treatment on the Damping Capacity and Mechanical Properties of Mg-6Al-1Zn Alloy

The damping capacity and mechanical properties of Mg-6Al-1Zn alloy after heat treatment were investigated. The damping characteristics of un-heat-treated, solution treated, and aged Mg-6Al-1Zn specimens were determined by measuring the damping ratio and the logarithmic decrement of free vibrations of a bending beam clamped at one side. The microstructural evaluations confirmed that the β-Mg17Al...

متن کامل

Aging Effect of Mg-Sc Alloy with α+β Two-Phase Microstructure

Mg-20.5 at% Sc alloy with hcp (α)+bcc (β) two-phase was investigated to understand the effects of aging treatment at 473 K on microstructure, hardness and tensile properties. A Mg-Sc alloy ingot was prepared by induction melting in an Ar atmosphere, and then hot rolled at 873 K followed by cold rolling into a sheet. The rolled specimens were annealed at 873 K to obtain an α+β two-phase microstr...

متن کامل

Investigation into Aging Effect on Wear Behavior of Titanium Alloy

Ti-6Al-4V titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. In the current research, the effect of aging treatment on microstructure and wear behavior of Ti-6Al-4V titanium alloy was investigated. Pin on disk wear test was applied to assess the wear behavior. Specimens were first solut...

متن کامل

Preparation and Characterization of B 4 C Particulate Reinforced Al - Mg Alloy Matrix Composites

This paper describes the fabrication and mechanical testing of Al-Mg-boron carbide particulate composites using stir casting technique. The size of the boron carbide particulates is ranging between 30 to 100 μm. The boron carbide contents are varied from 3 and 7% by weight and are dispersed in the alloy matrix. The mechanical properties of the castings, particularly their tensile properties and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Institute of Metals and Materials

سال: 1969

ISSN: 0021-4876,1880-6880

DOI: 10.2320/jinstmet1952.33.7_796