Texture Formation during High Temperature Compression Deformation in Al-3mass%Mg Alloy
نویسندگان
چکیده
منابع مشابه
Texture Measurement in Aluminum Alloy at High Temperature
The casting and hot rolling process is a most important and widely used industrial route to produce aluminum alloy sheet[I]. Because rolling is such a high volume process and the capital expenditure in plants and fabrication facilities is so large, even small cost savings or increases in efficiency can result in a very large total money savings[2, 3]. To remove the very costly and time-consumin...
متن کاملMicrostructure and High Temperature Deformation Behavior of Cast 310S Alloy
High temperature deformation behavior of cast 310S stainless steel has been investigated in this study by performing tensile and compression tests at temperatures from 900 to 1200C. Rectangular ingots of which the dimensions were 350×350×100 in millimeter were cast using vacuum induction melting. Phase equilibrium was calculated using the FactSage®, thermodynamic software and database. Thermal ...
متن کاملConstitutive Equation and Hot Compression Deformation Behavior of Homogenized Al–7.5Zn–1.5Mg–0.2Cu–0.2Zr Alloy
The deformation behavior of homogenized Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr alloy has been studied by a set of isothermal hot compression tests, which were carried out over the temperature ranging from 350 °C to 450 °C and the strain rate ranging from 0.001 s-1 to 10 s-1 on Gleeble-3500 thermal simulation machine. The associated microstructure was studied using electron back scattered diffraction (EBSD)...
متن کاملMODELING HIGH TEMPERATURE FLOW BEHAVIOR OF AN AL 6061 ALUMINIUM ALLOY
Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...
متن کاملMicrostructure and micro-texture evolution during large strain deformation of Inconel alloy IN718
Article history: Received 2 January 2015 Received in revised form 22 October 2015 Accepted 23 October 2015 Available online 27 October 2015 The hot deformation behaviour of Inconel alloy IN718 was studied in the temperature range of 950–1100 °C and at strain rates of 0.01 and 1 s with a view to understand the microstructural evolution as a function of strain rate and temperature. For this purpo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals
سال: 2006
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet.70.562