Texture Analysis in Alumina Plasma Sprayed Coatings

Failure analysis of suspension plasma sprayed thermal barrier coatings

Sintering of Fine Particles in Suspension Plasma Sprayed Coatings

Suspension plasma spraying is a process that enables the production of finely grained nanometric or submicrometric coatings. The suspensions are formulated with the use of fine powder particles in water or alcohol with some additives. Subsequently, the suspension is injected into plasma jet and the liquid additives evaporate. The remaining fine solids are molten and subsequently agglomerate or ...

Splat Formation and Nanohardness Investigation of Atmospheric Plasma Sprayed Alumina

Atmospheric plasma spraying (APS) is a well established process for preparing ceramic coatings. In this process, powder particles injected into the plasma jet are heated and accelerated simultaneously in the plasma stream and are deposited in molten or semi-molten droplets conditions onto a prepared substrate. During droplet impingement, these molten droplets rapidly solidify to form single spl...

Suspension Plasma Sprayed Titanium Oxide and Hydroxyapatite Coatings

The paper aims at development of TiO2, Ca5(PO4)3OH (hydroxyapatite, HA) and their multilayer coatings onto stainless steel, titanium and aluminum substrate using suspension plasma spraying. The total thickness of the coatings was in the range 10 to 150 μm. The suspension on the base of distilled water, ethanol and their mixtures was formulated with the use of fine commercial TiO2 pigment crysta...

Microstructure and Properties of Plasma Sprayed Nanostructural ZrO2 Coatings

Plasma sprayed zirconia deposits have been employed in wide applications for thermal protection. Recently, the use of nanostructural surface represents an alternative for improving the performance of these coatings. The present paper reviewed the works in this field at our research group, including synthesis of nanostructural ZrO2 powders, influence of spraying parameters on microstructure and ...