Texture analysis and R-value variation after severe shear deformed and heat treated Al alloy sheets
نویسندگان
چکیده
منابع مشابه
EFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...
متن کاملMorphological and Thermal Flux Analysis in as-Cast Al Alloy after Swarf Addition
In this research, effect of swarf addition on the microstructure of die cast aluminum A380 alloy and the possibility of altering the alloy structure in the metallic die has been studied. The microstructure mainly consists of the α-phase, eutectic, intermetallic compounds and porosity. Since the alloy solidifies under non-equilibrium conditions, the Scheil equation with exact amount of equilibri...
متن کاملinvestigation of nanocrystalline structucture of severe plastic deformed aluminium 6061 alloy surface by afm and xrd
wire-brushing is used for different purposes such as removing metal surfaces oxides, increasing surface brightness, improving fatigue properties and surface activation before coating. the wire-brushing severely scratches and stirs the metals in the surface layers, so that complicated metal flow gives rise to very large amount of plastic strain and increases dislocation density of the surface la...
متن کاملNumerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy
Metal spinning as a kind of manufacturing process has capability to shape hollow components. In present work shear spinning process is used to formplates into conical shapes. Moreover, the aim of this research is to demonstrate the impact of the process parameters (i.e. feeding rate and spindle speed) on wall thickness. This approachwas done by experimental and finite elements method. The resul...
متن کاملNumerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy
Metal spinning as a kind of manufacturing process has capability to shape hollow components. In present work shear spinning process is used to formplates into conical shapes. Moreover, the aim of this research is to demonstrate the impact of the process parameters (i.e. feeding rate and spindle speed) on wall thickness. This approachwas done by experimental and finite elements method. The resul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2009
ISSN: 1742-6596
DOI: 10.1088/1742-6596/165/1/012001