Textile Chemical Finishing

Cyclodextrins in Textile Finishing

Preparation of Nano-ZnO and Its Application to the Textile on Antistatic Finishing

Nano-ZnO was prepared by direct precipitation method with zinc chloride and sodium carbonate anhydrous as raw materials, and its particle size and dispersion were characterized by TEM. The effects of concentration and the ratio of reactants and reaction temperature on its dispersion in aqueous solution were analyzed and the best reaction conditions were as follows: reaction temperature 60 , ult...

Physical and chemical characterisation of metal finishing industrial wastes.

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals....

Removal of dyes from textile effluents by chemical coagulation

Surface charge density studies as well as characterizations of coagulated dye sludge were investigated to explain the mechanism which takes place during removal of dyes from effluents by chemical coagulation. A simple laboratory model was used to compare two commercially used textile azo dyes: CI “Reactive Black 5” and “Acid Black 1” that were coagulated with synthetic primary coagulants have b...

Physico-chemical Characterization of the Textile Dye Effluent and Isolation of Lignin Degrading Fungi Physico-Chemical Characterization of Textile Dye Effluent