Tests on Inert-Gas Metal-Arc Welding of Corrosion Resisting Aluminum Alloy "Anp" Plates (Report 1)
نویسندگان
چکیده
منابع مشابه
Effect of Repeated Repair Metal Inert Gas Welding on Microstructural Properties, Corrosion Resistance, and Wear Behavior of 5083-H116 Aluminum Alloy
The effect of repeated repair welding, shielded with argon, on microstructural properties, corrosion resistance, and dry sliding wear behavior of aluminum alloy 5083/H116 were investigated. Samples were welded by metal inert gas welding method. 100% argon was used to protect fusion zone. Aluminum alloy 5356 was used as the filler metal. The samples for microstructure, corrosion, and wear tests ...
متن کاملMetal Transfer and Arc Plasma in Gas Metal Arc Welding
This article analyzes the transient complex heat transfer and fluid flow in molten metal and arc plasma during the gas metal arc welding process. The model predicts the formation, growth, detachment, and transfer of droplets from the tip of a continuously fed electrode under the influences of several competing forces including gravity, electromagnetic force, arc pressure, plasma shear stress, a...
متن کاملEffects of shielding gas compositions on arc plasma and metal transfer in gas metal arc welding
This article presents the effects of shielding gas compositions on the transient transport phenomena, including the distributions of temperature, flow velocity, current density, and electromagnetic force in the arc and the metal, and arc pressure in gas metal arc welding of mild steel at a constant current input. The shielding gas considered includes pure argon, 75% Ar, 50% Ar, and 25% Ar with ...
متن کاملControl of pulsed gas metal arc welding
This paper presents a control system for manual pulsed Gas Metal Arc Welding (GMAW). This system consists of a current controller, which makes it possible to shape the current during welding, and two important components, which are the key issues discussed in this paper. These components include an arc length controller and a metal transfer controller. The arc length controller is based on a no...
متن کاملDynamic Behaxior of Gas Metal Arc Welding
Gas Metal arc Welding (GMABQ has become the most addely used process for joining of steel plates due to its high productixity, simplicity of equipment and ease of use. Although the process of melting of the electrode and development of the weld deposit has been studied for 40 years, the dynamic nature of the process has not been studied in detail because accurate models are computationally inte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1956
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.25.521