Testing of Ultra-Low Cycle Fatigue at Complex Loading Scenarios
نویسندگان
چکیده
منابع مشابه
Ultra-Low Cycle Fatigue Fracture Life of a Type of Buckling Restrained Brace
Buckling restrained braced frames (BRBFs) for seismic load resistance have been widely used in recent years. One of the key requirements for a buckling restrained brace is to sustain large plastic deformations under severe ground motions. The core of a buckling restrained brace is prone to fatigue fracture under cyclic loading. The earthquake induced fracture type of the core plate in a bucklin...
متن کاملUltra low cycle fatigue of welded steel joints under multiaxial loading
Ultra low cycle fatigue (ULCF) is a phenomenon that can be summarily defined as the deterioration of material properties under high amplitude cyclic loading, under which failure is reached typically within ten to twenty cycles. This phenomenon is observed in extreme loading scenarios such as earthquakes or exceptional winds where large cyclic strains are expected. Particularly sensitive are str...
متن کاملLow Cycle Fatigue Testing of Ball Grid Array Solder Joints under Mixed-Mode Loading Conditions
To give a proper and accurate estimation of the fatigue life of ball grid array (BGA) solder joints, a mechanical fatigue test method under mixed-mode loading is proposed. Experiments were conducted with 63Sn/37Pb and Sn/3.5Ag/0.75Cu solder joints in room temperature. The mechanical low cycle fatigue tests were performed under several loading angles. The loading angle is controlled by several g...
متن کاملUltra Low Cycle Fatigue of Axisymmetric Freestanding Nanoscale Gold Films
We present ultra low-cycle fatigue experiments of axisymmetric nano-crystalline gold films of nano-thickness deformed by a spherical indenter using a recently developed freestanding membrane test. Freestanding membranes of gold were centrally deflected using a spherical indenter attached to a MEMS load cell. Fabrication of the films for these experiments yielded films 100 nm thick and 500 μm in...
متن کاملEvaluation of continuum damage at different temperatures for aluminum-silicon alloy of engine piston within low-cycle fatigue regime
In this article, the isothermal low-cycle fatigue continuum damage in the engine piston aluminum alloy has been evaluated at different temperatures. For this objective, experimental data of low-cycle fatigue tests on standard specimens were used at 280, 350 and 425°C. Based on the continuum damage mechanics method, the fatigue damage was calculated during cyclic loading. Obtained results, inclu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Structural Integrity
سال: 2017
ISSN: 2452-3216
DOI: 10.1016/j.prostr.2017.07.201