Ternary polymer blend with core–shell dispersed phases: effect of the core-forming polymer on phase morphology and mechanical properties
نویسندگان
چکیده
منابع مشابه
Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends
In this work, ternary polymer blends based on polypropylene (PP)/ polyethylene terephthalate (PET) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS-g-MAH) at various compositions were prepared by co-rotating twin screw extruder. The effects of PET, SEBS and SEBS-g-MAH compatibilizer on morphology of the blends were ex...
متن کاملeffective parameters on the phase morphology and mechanical properties of pp/pet/sebs ternary polymer blends
in this work, ternary polymer blends based on polypropylene (pp)/ polyethylene terephthalate (pet) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (sebs) triblock copolymer and a reactive maleic anhydride grafted sebs (sebs-g-mah) at various compositions were prepared by co-rotating twin screw extruder. the effects of pet, sebs and sebs-g-mah compatibilizer on morphology of the blends were ex...
متن کاملStudy of Aspect Ratio Effect on Mechanical Properties Polymer/NanoComposite
Carbon nanotubes (CNTs) demonstrate unusually high stiffness, strength and resilience, and are therefore an ideal reinforcing material for nanocomposites. However, much work has to be done before the potentials of CNT-based composites can be fully realized. Evaluating the effective material properties of such nanoscale materials is a very difficult tasks. Simulations using molecular dynamics ...
متن کاملMorphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC
In this study, eight binary blends of polypropylene (PP)/ poly [styrene-b-(ethylene-co butylene)-b-styrene] tri-block copolymer (SEBS) and polypropylene (PP)/ polycarbonate (PC) were produced at different composition through twin screw extruder. The composition of the minor phases was changed to correlate the morphology and mechanical properties of binary blends (PP/PC and PP/SEBS) through ther...
متن کاملMechanical Properties and Adhesion of a Micro Structured Polymer Blend
A 50:50 blend of polystyrene (PS) and poly(n-butyl methacrylate) (PnBMA) has been characterized with an Atomic Force Microscope (AFM) in Tapping Mode and with force-distance curves. The polymer solution has been spin-coated on a glass slide. PnBMA builds a uniform film on the glass substrate with a thickness of ≅200 nm. On top of it, the PS builds an approximately 100 nm thick film. The PS-film...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer
سال: 2000
ISSN: 0032-3861
DOI: 10.1016/s0032-3861(00)00057-4