Tensile Strength of High Carbon Steel

Tensile Testing of Carbon Steel in High Pressure Hydrogen

An infrastructure of new and existing pipelines and systems will be required to carry and to deliver hydrogen as an alternative energy source under the hydrogen economy. Carbon and low alloy steels of moderate strength are currently used in hydrogen delivery systems as well as in the existing natural gas systems. It is critical to understand the material response of these standard pipeline mate...

Yield & Tensile Strength of Steel & Aluminium Using Microindentation

Bond of High Strength Concrete with High Strength Reinforcing Steel

This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...

Failure Investigation of Hydrogen Blistering on Low-strength Carbon Steel

The current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. For this purpose, some experiments including hardness test, non-destructive test (NDT), metallography, and fractograpghy are conducted. The microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (SEM). The microstructural studies show that t...

Bacterial adherence to high--tensile strength sutures.

PURPOSE The purpose of this study was to evaluate the bacterial adherence to high--tensile strength suture materials using a bioluminescent in vitro model. METHODS Eleven strands each of No. 2 MaxBraid (Arthrotek [Biomet], Warsaw, IN), FiberWire (Arthrex, Naples, FL), Ethibond (Ethicon, Somerville, NJ), Orthocord (DePuy Mitek, Raynham, MA), and silk (Ethicon) sutures were immersed in a broth ...