Tensile strength of adhesively bonded and hybrid (bonded/riveted) dissimilar single-lap joints
نویسندگان
چکیده
Glass fiber-reinforced composites are commonly employed as structural materials in many fields. In addition, glass frequently used with metals, particularly the automotive and aerospace industry. this context, tensile strengths of simple hybrid single-lap joints having similar (i.e., aluminum/aluminum composite/composite) dissimilar aluminum/composite) plates were investigated experimentally study. At point, 6061 aluminum alloy E-glass/epoxy composite adherends Araldite 2014-1 was adhesive. The produced using vacuum infusion technique consist laminates [0°/90°/+45°/−45°]6 stacking sequence. Two different types adhesively bonded bonded/riveted) for joints. both 3-rivet 4-rivet bonded/riveted results revealed that strength could be considerably increased addition rivets to particular, showed value bonded/4-riveted joint is 5.7 times higher than
منابع مشابه
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملPropagation of ultrasonic Lamb waves in adhesively bonded lap joints
This paper considers the bonded joint as a multilayer structure that is analysed using the Transfer Matrix method. In this particular case three layers (two adherents and the adhesive) are considered. The study of this propagation problem may be developed from matrix formulations which describe elastic waves in layered media. This technique combines the theory of the dynamics of the continuum w...
متن کاملExperimental and Analytical Investigations of the Dynamic Response of Adhesively Bonded Single Lap Joints
Dynamic response of single lap joints, subjected to a harmonic peeling load is studied theoretically and experimentally. In the theoretical part, dynamic response of a single lap joint clamped at one end and subjected to a harmonic peeling load at the other end is investigated. Adherents are modeled as Euler-Bernouli beams joined in the lap area by a viscoelastic adhesive layer. Both axial and ...
متن کاملDynamic response of adhesively bonded single-lap joints with a void subjected to harmonic peeling loads
The only viable method to join some components is by using adhesives. These components are often subjected to dynamic loading, which may cause initiation and propagation of failure in the joint. In order to ensure the reliability of these structures, their dynamic response and its variation with the presence of defects in the bonded area must be understood. The dynamic response of a single-lap ...
متن کاملComputational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of automotive science and technology
سال: 2022
ISSN: ['2587-0963']
DOI: https://doi.org/10.30939/ijastech..1193217