Tensile properties of a composite–metal single-lap hybrid bonded/bolted joint
نویسندگان
چکیده
منابع مشابه
Optimization and Simulation Research of Tensile Properties of Wood Lap Joint
The performance of veneer joints is known to affect the quality of laminated veneer lumber (LVL), so experimental research and simulation analysis of the tensile properties of lap joints were performed and reported in this paper. The lap length, specimen thickness, and specimen width were selected as the experimental factors. The maximum tensile load increased with the increase of each factor; ...
متن کاملThe Effect of Fiber Breakage on Transient Stress Distribution in a Single-Lap Joint Composite Material
In the present study, the transient stress distribution caused by a break in the fibers of an adhesive bonding is investigated. Transient stress is a dynamic response of the system to any discontinuity in the fibers from detachment time till their equilibrium state (or steady state). To derive the governing dynamic equilibrium equations shear lag model is used. Here, it is assumed that the tens...
متن کاملTensile Properties of Ferrite-austenitic Welded Joint
Very often, in order to optimized welded constructions, some of their parts are made of heterogeneous steels. For example, microalloyed steels are in use for cars chassis making and high alloyed steels for different constructions making. From that reason, it’s not rare to find welded joints between ferrite microalloyed and austenitic highalloyed steels. As a rule, these joints are welded by usi...
متن کاملFracture mechanics-based life prediction of a riveted lap joint
In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...
متن کاملComputational modelling of thermal impact welded PEEK/steel single lap tensile specimens
In this contribution, an interfacial traction-separation-law based on elastoplasticity with Lemaitre-type-damage is applied. Related constitutive equations are decoupled with respect to a local orthonormal frame such that the stress–strain response is controlled independently in these directions. The constitutive traction-separation-law is applied to the simulation of thermal impact welded (TIW...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Aeronautics
سال: 2021
ISSN: 1000-9361
DOI: 10.1016/j.cja.2020.03.042