Tensile Deformation Behavior of Sintered Chromium
نویسندگان
چکیده
منابع مشابه
Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test
In the present work, hot tensile behavior of Haynes 25 Co-base alloy was investigated in the temperature range of 950-1200 ˚C and 0.1 s-1. Thermodynamic calculations showed that M23C6 and M6C carbides were stable below 1000 ˚C and above 1050 ˚C, respectively. Stress-strain curves also indicated an unusual trend of strain fracture. It was observed that with increasing temperature from 950 to 105...
متن کاملDamage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation
In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...
متن کاملDensification and Deformation Behavior of Sintered P/M Zinc-Zinc Oxide Composite during Cold Upsetting
Studies were carried out to evaluate the initially preformed density and initial aspect ratio on the densification behavior of sintered Zinc and Zinc Oxide composite. The preform possessed 0.85 is the initial density. Aspect ratio for three different oxidizing temperatures (at 150°C, 200°C and 250°C) varied from 0.4 to 0.85. Properties of Zinc-Zinc Oxide composites with respect to linear strain...
متن کاملAn Experimental and Numerical Study of Deformation Behavior of Steels in Biaxial Tensile Tests
Lightweighting materials are increasingly being used by automotive companies as sheet metal components to meet fuel economy targets by the year 2025. Consequently, accurate material model data need to be developed by applying biaxial strain paths with cross-shaped specimens, since traditional uniaxial stress-strain data cannot capture the deformation behavior in complex forming operations. This...
متن کاملAtomistic Simulation of Tensile Deformation Behavior of ∑5 Tilt Grain Boundaries in Copper Bicrystal
Experiments on polycrystalline metallic samples have indicated that Grain boundary (GB) structure can affect many material properties related to fracture and plasticity. In this study, atomistic simulations are employed to investigate the structures and mechanical behavior of both symmetric and asymmetric ∑5[0 0 1] tilt GBs of copper bicrystal. First, the equilibrium GB structures are generated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1988
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.52.2_223