Tensile, Compression and Fracture Properties of Thick-Walled Ductile Cast Iron Components

Effects of Silicon on Mechanical Properties and Fracture Toughness of Heavy-Section Ductile Cast Iron

The effects of silicon (Si) on the mechanical properties and fracture toughness of heavy-section ductile cast iron were investigated to develop material for spent-nuclear-fuel containers. Two castings with different Si contents of 1.78 wt.% and 2.74 wt.% were prepared. Four positions in the castings from the edge to the center, with different solidification cooling rates, were chosen for micros...

Fatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts

Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...

NDT of Ductile Cast Iron from Nuclear Waste Storage Canisters

The concept for geological disposal of nuclear waste and spent nuclear fuel relies on a multi-barrier system with the copper/cast iron canister as the first barrier. The canister is designed to retain its integrity for at least 100000 years, which means that future glaciations need to be considered. A thick ice block together with hydrostatic pressure from groundwater would produce hydrostatic ...

Fuzzy Expert System to Assess Corrosion of Cast/Ductile Iron Pipes from Backfill Properties

Several factors may contribute to the structural failure of cast and ductile iron water mains, the most important of which is considered to be corrosion. The ANSI/AWWA C105/A21.5–99 10-point scoring (10-P) method is commonly used to predict corrosivity potential of a given soil sample using certain soil properties. The 10-P and other scoring methods use binary logic to classify the soil either ...

Undercooling and nodule count in thin walled ductile iron castings