Tensile Bending Stresses in Mortar-Grouted Riprap Revetments Due to Wave Loading

Experimental study of grouted sleeve lapping connector under tensile load

The performance of the grouted sleeve lapping connector that is used to connect reinforcement bars in a precast concrete structure is studied. A total of 63 specimens, varying in bar diameter and lap length, were tested under tensile load. The failure modes, ultimate tensile strength values and load-displacement curves of the specimens are discussed in the study. Two equations are proposed for ...

Detection of Bending Stresses in Buried Pipelines

When gas or oil pipelines must be laid through sand or permafrost or other unstable soils, the pipe walls can he subjected to large bending loads if the soil shifts. In order to detect this condition and correct it, it would be useful to monitor the state of stress along the pipeline'at regular time intervals using a vehicle that is moved through the line by the fluid or gas in it. The experime...

Tensile failure mechanisms in synthetic fibre-reinforced mortar

The ultimate tensile behaviour of fibre-reinforced cementitious composites is closely related to its failure mechanisms which in turn are dependent on reinforcement parameters such as fibre characteristics and the fibre/matrix interface properties. Based on the direct tensile tests of mortar specimens reinforced with various synthetic fibres, this paper attempts to explain such relationships an...

Characterization of fabric tensile loading curve in nonlinear region related to their structure; Part1: woven fabric

Effect of Mortar Type on the Seismic Response of Partially Grouted Reinforced Masonry Shear Walls

Since the establishment of ASTM standard C91, masonry cement mortars have become widely used for masonry construction in low to moderate seismic regions. However, the Masonry Standards Joint Committee Code prohibits the use of masonry cement mortars in lateral force resisting systems for structures that fall into Seismic Design Categories D, E, and F. The general objective of this study is to e...