Tensile behaviour for mercerization of single kenaf fiber
نویسندگان
چکیده
منابع مشابه
Evaluation of Flexural and Tensile Properties of Short Kenaf Fiber Reinforced Green Composites
The present work study flexural and tensile behavior of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and tension tests are carried out as per ASTM standards. The flexural...
متن کاملProperties of Unidirectional Kenaf Fiber–Polyolefin Laminates
The objective of this research was to evaluate the effect of kenaf fiber orientation and furnish formulation on the properties of laminated natural fiber–polymer composites (LNPC). The uniaxial fiber orientation provided property enhancement of the LNPC. The randomly oriented kenaf fibers, regardless of fiber contents in the laminates, provided an equal performance compared to the composites ma...
متن کاملBenefits of Low Kenaf Loading in Biobased Composites of Poly(L-lactide) and Kenaf Fiber
Bast fibers from stems of kenaf (Hibiscus cannabinus, L.), a warm-season tropical herbaceous annual plant, were dispersed into poly-L-lactide (PLLA) matrix by melt-mixing followed by compression molding. Low fiber fractions (1–5%) were investigated. The composites showed a slight lowering of thermal stability when evaluated by thermogravimentric analysis. X-ray diffraction and differential scan...
متن کاملTensile creep behaviour of polymethylpentenesilica nanocomposites
For the first time, poly(4-methyl-1-pentene) (PMP) nanocomposites were prepared by melt compounding 2 vol% of fumed silica nanoparticles, in order to study the role of the nanofiller surface area and functionalization on the tensile mechanical response of the material, with particular focus on its creep behaviour. The high optical transparency of the polymer matrix was substantially preserved i...
متن کاملThe influence of chemical surface modification of kenaf fiber using hydrogen peroxide on the mechanical properties of biodegradable kenaf fiber/poly(lactic acid) composites.
Bleaching treatment of kenaf fiber was performed in alkaline medium containing hydrogen peroxide solution maintained at pH 11 and 80 °C for 60 min. The bleached kenaf fiber was analyzed using Fourier Transform Infrared (FTIR) and X-ray Diffraction (XRD) analysis. The bleached kenaf fiber was then compounded with poly-(lactic acid) (PLA) via a melt blending method. The mechanical (tensile, flexu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Malaysian Journal of Fundamental and Applied Sciences
سال: 2018
ISSN: 2289-599X,2289-5981
DOI: 10.11113/mjfas.v14n4.1099