Tensile and high cycle fatigue tests of NiCo thin films
نویسندگان
چکیده
منابع مشابه
High-Cycle Fatigue of Single-Crystal Silicon Thin Films
When subjected to alternating stresses, most materials degrade, e.g., suffer premature failure, due to a phenomenon known as fatigue. It is generally accepted that in brittle materials, such as ceramics, fatigue can only take place in toughened solids, i.e., premature fatigue failure would not be expected in materials such as single crystal silicon. The results of this study, however, appear to...
متن کاملarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولHigh-temperature tensile behavior of freestanding Au thin films
The mechanical behavior of freestanding thin sputter-deposited films of Au is studied at temperatures up to 340°C using tensile testing. Films tested at elevated temperatures exhibit a significant decrease in flow stress and stiffness. Furthermore the flow stress decreases with decreasing film thickness, contravening the usual notion that “smaller is stronger”. This behavior is attributed mainl...
متن کاملAn Electrical Method for Measuring Fatigue and Tensile Properties of Thin Films on Substrates
A novel approach for measuring thermal fatigue lifetime and ultimate strength of patterned thin films on substrates is presented. The method is based on controlled application of cyclic joule heating by means of low-frequency, high-density alternating current. Such conditions preclude electromigration, but cause cyclic strains due to mismatch in coefficients of thermal expansion between film an...
متن کاملHigh-Cycle Fatigue of Polycrystalline Silicon Thin Films in Laboratory Air
When subjected to alternating stresses, most materials degrade, e.g., suffer premature failure, due to a phenomenon known as fatigue. It is generally accepted that in brittle materials, such as ceramics, cyclic fatigue can only take place where there is some degree of toughening, implying that premature fatigue failure would not be expected in polycrystalline silicon where such toughening is ab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.04.217