Tensile and flexural properties of MWCNT-COOH and hBN integrated polyamide 66/short glass fiber composites

Evaluation of Flexural and Tensile Properties of Short Kenaf Fiber Reinforced Green Composites

The present work study flexural and tensile behavior of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and tension tests are carried out as per ASTM standards. The flexural...

Correlation Between 90o Tensile and 90o Flexural Properties for Thermoplastic Based Carbon-Fiber Composites

Effect of fiber content on flexural properties of glass fiber-reinforced polyamide-6 prepared by injection molding.

The use of non-metal clasp denture (NMCD) materials may seriously affect the remaining tissues because of the low rigidity of NMCD materials such as polyamides. The purpose of this study was to develop a high-rigidity glass fiber-reinforced thermoplastic (GFRTP) composed of E-glass fiber and polyamide-6 for NMCDs using an injection molding. The reinforcing effects of fiber on the flexural prope...

Deformation and Flexural Properties of Glass Fiber Sheet

The purpose of this study was to investigate the deformation and flexural properties of acrylic and urethane polymers reinforced with glass fiber sheet. Four types of specimen — self-curing resin plate (R) , light-curing oligomer plate containing a reinforcement (GO) , and self-curing resin plate containing a reinforcement on one (GR) or both (GRG) sides — were prepared with three thicknesses: ...

Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...