Template-assisted, Sol-gel Fabrication of Biocompatible, Hierarchically Porous Hydroxyapatite Scaffolds
نویسندگان
چکیده
منابع مشابه
Fabrication of Porous Hydroxyapatite-Gelatin Composite Scaffolds for Bone Tissue Engineering
Background: engineering new bone tissue with cells and a synthetic extracellular matrix represents a new approach for the regeneration of mineralized tissues compared with the transplantation of bone (autografts or allografts). Methods: in this study, to mimic the mineral and organic component of natural bone, hydroxapatite (HA) and gelatin (GEL) composite scaffolds were prepared. The raw mater...
متن کاملSelective Deposition of Biocompatible Sol-Gel Materials
An aqueous sol-gel route has been developed for electrochemically controlled deposition onto micro and nanofabricated electrodes. TEOS and MeTEOS were hydrolyzed under acidic conditions, and alcohol products were removed by distillation. The resulting clear sol has a hydrolysis ratio between 40 and 45. Following hydrolysis, pH was raised to 5.0 with addition of potassium hydroxide. At room temp...
متن کاملPreparation of porous hydroxyapatite scaffolds
In this work, the sintering and grain growth of hydroxyapatite green bodies are analyzed in order to identify the optimum heat treatments for the preparation of porous hydroxyapatite scaffolds. Sintering in air at temperatures ranging between 1100 and 1200 °C yields dense materials with narrow grain-size distributions. The scaffolds are formed by the infiltration of polymer foams with hydroxyap...
متن کاملFabrication of Porous Hydroxyapatite-Gelatin Scaffolds Crosslinked by Glutaraldehyde for Bone Tissue Engineering
In this study, to mimic the mineral and organic components of natural bone, hydroxyapatite[HA] and gelatin[GEL] composite scaffolds were prepared using the solvent-casting method combined with a freeze drying process. Glutaraldehyde[GA] was used as a cross linking agent and sodium bisulfite was used as an excess GA discharger. Using this technique, it is possible to produce scaffolds with mecha...
متن کاملFacile and biocompatible fabrication of chemically sol-gel transitional hydrogel free-standing microarchitectures.
We report a facile method to fabricate free-standing, 3D hydrogel microarchitectures of chemically sol-gel transitional hydrogels, which is based on the use of hydrophilic substrate and aerosol of gelling agent without molding (or sandwiching) process. Using proposed methods, we fabricated hydrogel microarchitectures of sheets, meshes, or microunits without morphological distortions on the micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12081274