Temperature of rock formation and fracturing fluid during the hydraulic fracturing process

Simulation of hydraulic fracturing of jointed rock

This paper presents a modeling approach for three-dimensional simulation of hydraulic fracturing of jointed rock. The base for a successful computer based simulation for productive use is the ability to calculate the fractured volume with sufficient accuracy and efficiency. Especially in cases three dimensional effects have to be taken into account, the common commercial software tools in oil a...

Hydraulic and Pneumatic Fracturing

Self-Potential Observations During Hydraulic Fracturing

The self-potential (SP) response during hydraulic fracturing of intact Sierra granite was investigated in the laboratory. Excellent correlation of pressure drop and SP suggests that the SP response is created primarily by electrokinetic coupling. For low pressures, the variation of SP with pressure drop is linear, indicating a constant coupling coefficient (Cc) of -200 mV/MPa. However for press...

Complex Fluids and Hydraulic Fracturing.

Nearly 70 years old, hydraulic fracturing is a core technique for stimulating hydrocarbon production in a majority of oil and gas reservoirs. Complex fluids are implemented in nearly every step of the fracturing process, most significantly to generate and sustain fractures and transport and distribute proppant particles during and following fluid injection. An extremely wide range of complex fl...

Energy Analysis of Hydraulic Fracturing

In this paper, numerical simulations of circular boreholes under internal hydraulic pressure are carried out to investigate the energy transferred to the surrounding rock and the breakdown pressure. The simulations are conducted by using a micromechanical continuum damage model proposed by Golshani et al. (2006). The simulation results suggest that the borehole breakdown pressure and the energy...