Temperature effect on preparation of water-Storage ceramic foam with vanadium-titanium magnetite tailings
نویسندگان
چکیده
منابع مشابه
Preparation of Ceramic Composite Filter with Titanium Oxide Nanoparticles and Active Carbon Content for Treatment of Sea Water
In this mentioned study for sea water treatment ceramic composites were made from natural alumina and adsorbent active ingredients. According to the experimental results, filters along with active agents have acceptable effects on drinking water parameters and contaminants in compare with 1053 ISIRI standard. Modular set up was made for sea water treatment tests. Water flowrate after filtration...
متن کاملEfficient Extraction of Vanadium from Vanadium–Titanium Magnetite Concentrate by Potassium Salt Roasting Additives
Renmin Li 1,2,*, Tao Liu 1,2,3,*, Yimin Zhang 1,2,3,4, Jing Huang 1,2,3 and Chengbao Xu 1,2 1 Hubei Collaborative Innovation Center for High Efficient Utilization of Vanadium Resources, Wuhan 430081, China; [email protected] (Y.Z.); [email protected] (J.H.); [email protected] (C.X.) 2 College of Resource and Environmental Engineering, Wuhan University of Science and Technology, Wuhan 430081, Chi...
متن کاملInfluence of Coke Ratio on the Sintering Behavior of High-Chromium Vanadium-Titanium Magnetite
High-chromium vanadium and titanium magnetite (HCVTM) sinter has poor properties. The coke ratio has an important effect on the behavior of HCVTM sintering as it affects the mineral phases in the high-chromium vanadium and titanium sinter (HCVTS) via changing the sintering temperature and atmosphere. In this work, the sintering behavior of HCVTM mixed with varying coke ratios was investigated t...
متن کاملEffect of investment type and mold temperature on casting accuracy and titanium-ceramic bond.
This study evaluated the casting accuracy of crown margins and metal-ceramic shear bond strength (SBS) of pure titanium injected into casting molds made using 2 investment types at 3 mold temperatures. Sixty crown (30-degree beveled finish line) and 60 cylinder (5mm diameter × 8mm high) patterns were divided into 6 groups (n=10), and cast using a phosphate-bonded investment (P) and a magnesium ...
متن کاملEffect of sandblasting on fracture load of titanium ceramic crowns
PURPOSE OF THE STUDY It is difficult to achieve a reliable bond between the titanium and veneering porcelain. The aim of this study was to evaluate the bond strength between titanium ceramic crowns. MATERIALS AND METHODS The surfaces of titanium copings were divided in two groups. Group A sandblasted with 250 um (n = 10) and Group B without sandblasting (n = 10). Low-fusing porcelain was bond...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2020
ISSN: 1755-1315
DOI: 10.1088/1755-1315/619/1/012043