Temperature effect on electrochemical properties of lithium manganese phosphate with carbon coating and decorating with MWCNT for lithium-ion battery
نویسندگان
چکیده
The increasing demands for higher energy density and power capacity of Li-ion secondary batteries have led to a search electrode materials whose capacities performance are better than those available today. One promising candidate is lithium manganese phosphate, it necessary understand its transport properties. These properties crucial designing high-power batteries. effect on the electronic conductivity analyzed with conductor material, carbon nanotubes multi-walled, glucose was used as source. Here, LiMnPO4, LiMnPO4/C, LiMnPO4/MWCNT investigated using impedance spectroscopy. found increase temperature from 2.92 × 10−5 S cm−1 6.11 cm−1. magnetization investigated, antiferromagnetic behavior below 34 K reported three compositions. structural characterizations were studied confirm phase formation material XRD, TEM, SEM.
منابع مشابه
Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery
Lithium-iron-orthosilicate is one of the most promising cathode materials for Li-ion batteries due to its safety, environmental brightness and potentially low cost. In order to produce a low cost cathode material, Li2FeSiO4/C samples are synthesized via sol-gel (SG; one sample) and solid state (SS; two samples with different carbon content), starting from Fe (III) in the raw materials (lo...
متن کاملElectrochemical performance of lithium ion battery, nano-silicon-based, disordered carbon composite anodes with different microstructures
Nano-silicon-based disordered carbon composites prepared by mechanical milling and pyrolysis have been examined as anodes of a lithium ion cell. Electrochemical measurements show that the charge–discharge capacity of disordered carbon composites incorporating both silicon-polyparaphenylene (Si-PPP) and silicon-polyvinyl chloride (Si-PVC) with differing silicon contents, decreases with increasin...
متن کاملElectrochemical Properties of Chemically Processed SiOx as Coating Material in Lithium-Ion Batteries with Si Anode
A SiO x coating material for Si anode in lithium-ion battery was processed by using SiCl4 and ethylene glycol. The produced SiO x particles after heat treatment at 725°C for 1 h were porous and irregularly shaped with amorphous structure. Pitch carbon added to SiO x was found to strongly affect solid electrolyte interphase stabilization and cyclic stability. When mixed with an optimal amount of...
متن کاملLithium Lanthanum Titanium Oxides: A Fast Ionic Conductive Coating for Lithium-Ion Battery Cathodes
This work introduces Li−La−Ti−O (LLTO), which is a fast lithium-ion conductor, as an effective coating material for cathode materials used in rechargeable lithium-ion batteries. This fast Li-ion conductor is characterized by first-principles calculations showing low activation barrier for lithium diffusion at various different lithium concentrations. The morphology and the microstructure of the...
متن کاملMoO2@carbon hollow microspheres with tunable interiors and improved lithium-ion battery anode properties.
MoO2 hollow microspheres with tunable inner space have been synthesized through a hydrothermal process using MoO3 microbelts instead of bulk MoO3 as the precursor. It is found that the reactant morphology has a great impact on the product morphology and the inner space can be tuned by changing the amount of NaOH aqueous solution. An interesting evolutional process from MoO3 microbelts through a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Solid State Electrochemistry
سال: 2023
ISSN: ['1433-0768', '1432-8488']
DOI: https://doi.org/10.1007/s10008-023-05500-2