TEMPERATURE DISTRIBUTION OF HOLLOW FILAMENT DURING MELT SPINNING

Effect of Melt Spinning Variables on the Structural Changes of Recycled and Bottle Grade Filament Yarn PET

Optimal Control of Melt Spinning Processes

An optimal control problem for a mathematical model of a melt spinning process is considered. Newtonian and non–Newtonian models are used to describe the rheology of the polymeric material, the fiber is made of. The extrusion velocity of the polymer at the spinneret as well as the velocity and temperature of the quench air serve as control variables. A constrained optimization problem is derive...

Heat Transfer during Melt Spinning of Al-7%si Alloy on a Cu-be Wheel

Transient heat transfer models of the single-wheel meltspinning process are developed and applied to quantify the effect of process variables including interface depressions on solidification, temperature evolution, thickness variations, and surface depressions in the cast product. Firstly, a transient one-dimensional heat-transfer model of the melt-spinning process called STRIP1D was developed...

Distribution of Power Requirements during Yarn Winding in Ring Spinning

In-Situ X-Ray Characterization of Fiber Structure During Melt Spinning

The properties of a polymer are strongly influenced by its morphology. In the case of fibers from semicrystalline polymers this consists of the degree of crystallinity, the spacing and alignment of the crystalline regions, and molecular orientation of the polymer chains in the amorphous regions. Information on crystallinity and orientation can be obtained from X-ray analysis. In-situ X-ray char...