Temperature Dependence of Hall–Petch Parameters Using In Situ Diffraction Experiments in AZ31 Alloy

نویسندگان

چکیده

Abstract The temperature evolution of the Hall–Petch parameters for basal slip and twinning systems has been evaluated AZ31 alloy, using synchrotron radiation diffraction during compression tests from room to 473 K. alloy was processed following two processing routes, casting powder metallurgy, obtain different grain sizes with a similar strong fiber texture. Although macroscopic plasticity is controlled by tensile twinning, stress activation can also be calculated. At low temperatures, size dependence much higher than that slip. However, prevails at K, especially through metallurgy route, because tendency deformation.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

In-Situ Evaluation of Detwinning Behavior in Extruded AZ31 Mg Alloy by AE

Tension twinning readily occurs under compressive loading along extrusion direction because extruded AZ31 Mg plate has the texture with the basal planes parallel to the extrusion direction. Detwinning occurs in the twinned areas during tensile loading in the opposite direction. In this study, acoustic emission (AE) during the tensile test was investigated for the evaluation of detwinning behavi...

متن کامل

Isothermal Time-Temperature-Precipitation Diagram for an Aluminum Alloy 6005A by In Situ DSC Experiments

Time-temperature-precipitation (TTP) diagrams deliver important material data, such as temperature and time ranges critical for precipitation during the quenching step of the age hardening procedure. Although the quenching step is continuous, isothermal TTP diagrams are often applied. Together with a so-called Quench Factor Analysis, they can be used to describe very different cooling paths. Ty...

متن کامل

Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy

In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...

متن کامل

Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy

In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...

متن کامل

In-situ investigation of phase formation in nanocrystalline (Co97.5Fe2.5)89Zr7B4 alloy by high temperature x-ray diffraction

In-situ investigation of phase formation in nanocrystalline (Co97.5Fe2.5)89Zr7B4 alloy by high temperature x-ray diffraction Crystallization and phase evolution in an (Co 97.5 Fe 2.5) 89 Zr 7 B 4 amorphous alloy was studied by high temperature x-ray diffraction (HTXRD) and transmission electron microscopy (TEM). Co-based nano-composite alloys have zero magnetostriction and a strong response to ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: JOM

سال: 2022

ISSN: ['1543-1851', '1047-4838']

DOI: https://doi.org/10.1007/s11837-022-05320-1