Temperature Compensator for Volumetric Flow Meter

CMUT Based Free Membrane Intra-Cardiac Volumetric Blood Flow-Meter

MAIN BODY OF THE ABSTRACT: In this paper a free membrane is used as a receiver to increase the capacitance and therefore the accuracy of the flow meter. For the current application, from the wavelength of sound wave in soft tissue (c= 1540 m/s) the resolution was calculated to be 0.48 mm. This gives the first Eigen frequency of the capacitive structure according to which the poly silicon membra...

In Line Flow-meter Calibration

Comparison of the new miniature Wright peak flow meter with the standard Wright peak flow meter.

Preproduction and current models of the miniature Wright peak flow meter have been compared with the standard Wright peak flow meter on normal and abnormal subjects. Early problems in production appear to have been overcome, and the current model agrees to within 3% with the standard peak flow meter, which is as close as the agreement between two standard instruments. The new mini-meter may be ...

Temperature Stability of the Sky Quality Meter

The stability of radiance measurements taken by the Sky Quality Meter (SQM)was tested under rapidly changing temperature conditions during exposure to a stable light field in the laboratory. The reported radiance was found to be negatively correlated with temperature, but remained within 7% of the initial reported radiance over a temperature range of -15 °C to 35 °C, and during temperature chan...

K V Santhosh: Fusion of Venturi and Ultrasonic Flow Meter for Enhanced Flow Meter Characteristics Using Fuzzy Logic

This paper proposes a technique for measurement of liquid flow using venturi and ultrasonic flow meter(UFM) to have following objectives a) to design a multi-sensor data fusion (MSDF) architecture for using both the sensors, b) improve sensitivity and linearity of venturi and ultrasonic flow meter and c) detect and diagnosis of faults in sensor if any. Fuzzy logic algorithm is used to fuse outp...