Temperature and Pressure Dependence of Thermal Conductivity Measurements of High Density Polyethylene and Low Density Polyethylene
نویسندگان
چکیده
منابع مشابه
Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models
The loss of energy especially in industrial and residential buildings is one of the main reasons of increased energy consumption. Improving the thermal insulation properties of materials is a fundamental method for reducing the energy losses. Polymeric foams are introduced as materials with excellent thermal insulation properties for this purpose. In the present study, a deep theoretical invest...
متن کاملGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملImmobilization of Rhizomucor miehei Lipase on High Density Polyethylene
Immobilization of Lipase produced from Rhizomucor miehei on HDPE fine powder was investigated. As compared to an aqueous system, immobilization in a non-aquous organic medium such as n-hexane was not successful and caused enzyme denaturation. Prewetting the support with ethanol increased the immobilized protein and enzyme activity as much as 31% and 34%, respectively. The maximum immobilized a...
متن کاملThe effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers
HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air at room temperature at 25, 50, 75, 100 and 125 kGy dose ranges to induce a network structure. HDPE crosslinking was studied on the basis of gel content measurements. The fibers w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 2003
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.60.347