منابع مشابه
HIGH TEMPERATURE TENSILE PROPERTIES OF NEW FE-CR-MN DEVELOPED STEEL
Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of new steel and AISI 316 steel were done. The results ...
متن کاملNumerical Simulation of High Temperature Corrosion Processes in Mn, Cr, Si, Al – Alloyed Steel Samples
The grain boundary oxidation mechanism in hot rolled steel samples during cooling from 500 °C – 800 °C down to room temperature was mathematically modeled. Given a fixed temperature ramp, the migration of the atomic species (iron, oxygen and the alloying elements) has been calculated with the parabolic rate equation for diffusion. After each small time step, the data was transferred into the da...
متن کاملThe Effect of Nitrogen on Martensite Formation in a Cr-Mn-Ni Stainless Steel
The influence of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe-17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully austenitic at room temperature; those containing less nitrogen consist of a mixture of austenite, martensite and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are m...
متن کاملProduction and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...
متن کاملFerromagnetism in Mn- and Cr-Implanted AlGaP
Implantation of Mn or Cr at doses of 3–5 10 cm 2 into Si-doped Al0:24Ga0:76P epilayers on GaP substrates produced ferromagnetic ordering at temperatures up to 300 K. The results were similar to those obtained previously in p-type AlGaP(C), indicating that both electron and hole-doped AlGaP can exhibit ferromagnetism. In addition, the AlGaP results are similar to those for GaP so the magnitude o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1961
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.47.14_1884