TEM Characterization of HSLA Steels and Welds
نویسندگان
چکیده
منابع مشابه
Structure and properties of TM processed HSLA steels
This paper deals with the influence of steel composition (with respect to the microalloying elements) and therrnomechanical treatment on structure and mechanical behaviour of HSLA (High Strength Low Alloy) steels. Four different microalloyed steels have been TM rolled under variing conditions. The austenite structure prior to transformation could be revealed by means of a special etching techni...
متن کاملMicrostructure Evolution of HSLA Pipeline Steels after Hot Uniaxial Compression
The mechanical properties of the high-strength low-alloy pipeline steels were mainly controlled by the subsequent phase transformations after rolling. The influence of hot uniaxial compression on the phase transformation of acicular ferrite was explored by viewing of the deformation degree, the deformation temperature, and the strain rate. The results show that the increase of deformation amoun...
متن کاملsynthesis and characterization of some macrocyclic schiff bases
ماکروسیکلهای شیف باز از اهمیت زیادی در شیمی آلی و دارویی برخوردار می باشند. این ماکروسیکلها با دارابودن گروه های مناسب در مکانهای مناسب می توانند فلزاتی مثل مس، نیکل و ... را در حفره های خود به دام انداخته، کمپلکسهای پایدار تولید نمایند. در این پایان نامه ابتدا یک دی آلدئید آروماتیک از گلیسیرین تهیه می شود و در مرحله بعدی واکنش با دی آمینهای آروماتیک و یا آلیفاتیک در رقتهای بسیار زیاد منجر به ت...
15 صفحه اولMicrostructure and mechanical properties of cold rolled, annealed HSLA strip steels
A large testing programme of a strip steel grade, microalloyed by vanadium, titanium and niobium, was conducted. The experiment was based on combination of cold rolling, recrystallization annealing, mechanical testing, metallographic examinations, SEM and TEM analyses. Samples in the form of stripes with dimensions of 3.9×25×500 mm were rolled in several passes with the total height reduction o...
متن کاملHeat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels
Microstructures and Charpy impact properties have been examined in two microalloyed steels following heat treatments to simulate weld heat affected zone (HAZ) structures over a range of heat input conditions, characterised by the cooling time from 800 to 500 !C (Dt8/5). The base materials were low carbon structural steel plates microalloyed with vanadium and nitrogen (V–N) and niobium (Nb), res...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2016
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s143192761600951x