TECHNOLOGY OF GASEOUS FUEL COMBUSTION RESPECT TO NOX FORMATION
نویسندگان
چکیده
منابع مشابه
Low NOx Combustion Technology for Minimizing NOx
A noble low NOx combustion technology, based on partial oxidation combustion concept in a fuel rich combustion zone, is successfully applied in this research. The burner is designed such that a portion of fuel is heated and pre-vaporized in the furnace then injected into a fuel rich combustion zone so that a partial oxidation reaction occurs. The effects of equivalence ratio, thermal load, and ...
متن کاملModelling NOx-Formation in Combustion Processes
As the regulations of pollutant emission is getting more and more strict, models of pollutant formation, as a part of system level models for control design, are needed. In this thesis NOx (nitrogen oxides) formation is modeled. A method is developed to mix equilibrium and non-equilibrium reaction equations to model NOx formation in combustion processes. This algorithm reduces high-index DAE sy...
متن کاملEffects of nitrogen content in fuel on NOX emissions under oxy-fuel coal combustion
Oxy-fuel coal combustion with flue gas re-circulation is known to be one of the most promising methods for reducing CO2 emissions from coal combustion power plants. In the oxy-fuel system, the combustion atmosphere consists of only O2 separated from air and flue gas re-circulated from a stack. Therefore, the flue gas is dominated by CO2 without any nitrogen gas. The most attractive potential as...
متن کاملNumerical Study of Reduction of NOx Emission by High Temperature Air Combustion Technology
A numerical study on Nox emission from an industrial furnace utilizing high temperature air combustion (HTAC) technology was done. The basic concept of the regenerative burner including heating a diluting of fresh air by flue gas was implemented in a two-dimensional furnace model. Governing equations in conjunction with a turbulence model and an overall chemistry model were solved using an impl...
متن کاملThree-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MM Science Journal
سال: 2016
ISSN: 1803-1269,1805-0476
DOI: 10.17973/mmsj.2016_11_201665