Technological properties of high alumina refractories with different phosphoric acid contents
نویسندگان
چکیده
منابع مشابه
Effect of a Carboxylic Acid on Rheological Properties of a High Alumina Cement Mortar
In this work, we studied the effect of carboxylic acid on the rheological properties of a high-alumina cement mortar (CH45) produced by the Algerian firm REFRACTAL.The investigated properties are setting time, water consumption, electrical conductivity, pH, density and the compressive strength. The results show a setting time of about 200 min for the acid...
متن کاملInvestigation of the Effect of high Alumina Cement on the Properties of Foamed Alumina Insulation Bricks
The purpose of this study was to investigate the effect of high alumina cement and Sintering temperature on microstructure, physical and mechanical properties of foamed alumina insulation bricks. The Slurry samples were prepared containing 75wt% of alumina and 25% wt of deionised water containing 1%, 3%, 5%, 7% wt% high Alumina cement and 2% wt% foam. Then samples were poured into metal molds....
متن کاملHigh frequency sonoluminescence in sulphuric acid and phosphoric acid
Multibubblesonoluminescence (MBSL) emission spectra at different forcing frequencies ( 20, 580, 850 KHz and 1.1 MHz) in Sulphuric acid and Phosphoric acid, under different noble gases atmosphere ( Ar, Xe and He) have been investigated. Using lower frequency we observed the presence of new emissions lines which may indicate the formation of ionized species with very high energy level inside the ...
متن کاملinvestigation of gassing behavior, electric and dielectric properties of different insulating fluids.
ترانسفورماتورهای قدرت از اجزای اصلی شبکه تامین انرژی الکتریکی می باشند که عملکرد قابل اطمینان ترانسفورماتورها یکی از فاکتورهای مهم و تعیین کننده در تامین انرژی الکتریکی محسوب می شود. در نتیجه بررسی و مانیتور عملکرد ترانسفورماتورها در شبکه و همچنین عیب یابی این ترانسفورماتورها غیرقابل اجتناب و ضروری می باشد. به طور کلی عایق های مایع در صنعت فشار قوی کاربردهای متفاوتی دارند که مهمترین وظیفه آنها...
15 صفحه اولOrdered Nanoporous Alumina Membranes Formed in Oxalic/Phosphoric Acid Using Hard Anodization
Highly self-ordered alumina nanopore arrays were fabricated using hard anodization technique in different mixtures of oxalic/phosphoric acid. The phosphoric acid concentration was varied from 0.05 to 0.3 M while the oxalic acid concentration was changed between 0.3 and 0.4 M. The self ordered nanoporous arrays were obtained in anodization voltage changing from 130 to 200 V. The interpore distan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the National Research Centre
سال: 2018
ISSN: 2522-8307
DOI: 10.1186/s42269-018-0030-5