Technological performance of formaldehyde-free adhesive alternatives for particleboard industry
نویسندگان
چکیده
منابع مشابه
Characterization and Performance of Melamine Enhanced Urea Formaldehyde Resin for Bonding Southern Pine Particleboard
Urea-formaldehyde resins modified by melamine were synthesized by four catalysts (H2SO4, HCl, H3PO4, and NaOH/NH4OH) with a F/U/M molar ratio of 1.38/1/0.074. Resin structure and thermal behavior were studied by C-NMR and DSC techniques. For H2SO4, HCl, and H3PO4 catalysts, resins were prepared by two stage pH adjustment: the first pH stage was set at 1.25 (H3PO4 pH 1.60) and second pH stage wa...
متن کاملUrea-formaldehyde Adhesive Resins*
Approximately 1 million metric tons of urea-formal-dehyde resin are produced annually. More than 70% of this urea-formaldehyde resin is used by the forest products in-*This information was written and prepared by a U.S. Government employee on official time and it is, therefore, in the public domain and not subject to copyright.
متن کاملmodification of urea- formaldehyde resin with furfural in particleboard for reduction of formaldehyde emission
partial replacement of formaldehyde with furfural in the urea-formaldehyde resin on the formaldehydeemission, physical and mechanical properties of particleboard was investigated. the modulus ofrupture (mor), modulus of elasticity (moe), internal bond (ib), water absorption (wa), thicknessswelling (ts) and formaldehyde emission (fe) of poplar particleboards made with the modifiedresins were mea...
متن کاملSynthesis of Humin-Phenol-Formaldehyde Adhesive
Humins are low-value-added byproducts from the biomass acid hydrolysis process. In the present work, humins were first employed as a phenol replacement for synthesis of modified phenol-formaldehyde adhesives through a two-step process. In this process, humins were first utilized to obtain alkaline soluble products, mainly consisting of phenolics, through a hydrothermal process. The obtained alk...
متن کاملassessment of the park- ang damage index for performance levels of rc moment resisting frames
چکیده هدف اصلی از طراحی لرزه ای تامین ایمنی جانی در هنگام وقوع زلزله و تعمیر پذیر بودن سازه خسارت دیده، پس از وقوع زلزله است. تجربه زلزله های اخیر نشان داده است که ساختمان های طراحی شده با آیین نامه های مبتنی بر نیرو از نظر محدود نمودن خسارت وارده بر سازه دقت لازم را ندارند. این امر سبب پیدایش نسل جدید آیین نامه های مبتنی بر عملکرد شده است. در این آیین نامه ها بر اساس تغییرشکل های غیرارتجاعی ...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Adhesion and Adhesives
سال: 2019
ISSN: 0143-7496
DOI: 10.1016/j.ijadhadh.2019.04.007