Technical Note: Patient dose from kilovoltage radiographs during motion‐synchronized treatments on Radixact ®
نویسندگان
چکیده
منابع مشابه
Patient dose from kilovoltage cone beam computed tomography imaging in radiation therapy.
Kilovoltage cone-beam computerized tomography (kV-CBCT) systems integrated into the gantry of linear accelerators can be used to acquire high-resolution volumetric images of the patient in the treatment position. Using on-line software and hardware, patient position can be determined accurately with a high degree of precision and, subsequently, set-up parameters can be adjusted to deliver the i...
متن کاملTechnical note: mineral deposits on Dacron bags during ruminal incubation.
Extensive DM contamination was found on Dacron bags that were incubated for prolonged periods of time in the rumen of steers fed alfalfa hay. The ash content of the contaminant was high, and most of it was acid-soluble X-ray analysis indicated the presence of hydroxylapatite and synthetic calcium magnesium phosphate or whitlockite. The contaminant appeared as a smooth coating on the Dacron fibe...
متن کاملMechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE)
Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...
متن کاملEffect of the Primary Microstructures during Training Producers on TWSME in NiTi Alloys (TECHNICAL NOTE)
The influence of the martensitic, martensitic+austenitic and austenitic structures in bending training on two-way shape memory effect (TWSME) in Ni-50.8 at %Ti and Ni-49.9 at %Ti alloys was studied. In addition of the primary structure, the effect of pre-strain, plastic strain, training cycle and training temperature on the TWSME was investigated. The prepared samples were trained in martensiti...
متن کاملTechnical note on the paper :
In Section 3.1 of [1] a methodology is presented to compute the salient points of a 3D mesh based on the computation of its protrusion function, see Equation (1) in [1]. Explicitly each point υ of the Mesh is examined as a potential salient point. Specifically a geodesic neighborhood is constructed for each point of the mesh and it is considered as a salient point if it is the local maximum of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Medical Physics
سال: 2020
ISSN: 0094-2405,2473-4209
DOI: 10.1002/mp.14461