Targets for High Rate Reactive Sputtering. ITO Deposition by Reactive dc Magnetron Sputtering with Ozone Introduction.
نویسندگان
چکیده
منابع مشابه
Deposition of Al/Cu Multilayer By Double Targets Cylindrical DC Magnetron Sputtering System
A cylindrical direct current magnetron sputtering coater with two targets for deposition of multilayer thin films and cermet solar selective surfaces has been constructed. The substrate holder was able to rotate around the target for obtaining the uniform layer and separated multilayer phases. The Al/ Cu multilayer film was deposited on the glass substrate at the following conditions: Working g...
متن کاملAlNXOY THIN FILMS DEPOSITED BY DC REACTIVE MAGNETRON SPUTTERING
AlNxOy thin films were produced by DC reactive magnetron sputtering, using an atmosphere of argon and a reactive gas mixture of nitrogen and oxygen, for a wide range of partial pressures of reactive gas. During the deposition, the discharge current was kept constant and the discharge parameters were monitored. The deposition rate, chemical composition, morphology, structure and electrical resis...
متن کاملOptimization of DC reactive magnetron sputtering deposition process for efficient YSZ electrolyte thin film SOFC
Yttria-stabilized zirconia (YSZ, ZrO2:Y2O3) thin films were deposited by reactive DC magnetron sputtering with a high deposition rate from a metallic target of Zr/Y in an argon/oxygen atmosphere. Plasma parameters and composition analysis of the gas phase reveal that the sputtering process in the “compound” mode is reached for a 2.5 sccm oxygen flow rate. Deposition onto silicon in “metal” mode...
متن کاملdeposition of al/cu multilayer by double targets cylindrical dc magnetron sputtering system
a cylindrical direct current magnetron sputtering coater with two targets for deposition of multilayer thin films and cermet solar selective surfaces has been constructed. the substrate holder was able to rotate around the target for obtaining the uniform layer and separated multilayer phases. the al/ cu multilayer film was deposited on the glass substrate at the following conditions: working g...
متن کاملDEPOSITION OF THIN TiO2 FILMS BY DC MAGNETRON SPUTTERING METHOD
Sputter deposition process is another old technique being used in modern semiconductor industries. Sputtering is a process that can deposit TiO2 material on wafer/glass substrates. In this process target is connected to negative high voltage. Further argon gas is introduced into the chamber and is ionized to a positive charge. The positively charged argon atoms are attracted and strike the nega...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 2000
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.43.779