Tailoring of interface of polypropylene/polystyrene/carbon nanofibre composites by polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene
نویسندگان
چکیده
منابع مشابه
Electroconductive Composites from Polystyrene Block Copolymers and Cu–Alumina Filler
Technological advancements and development of new materials may lead to the manufacture of sustainable energy-conducting devices used in the energy sector. This research attempts to fabricate novel electroconductive and mechanically stable nanocomposites via an electroless deposition (ELD) technique using electrically insulating materials. Metallic Cu is coated onto Al₂O₃ by ELD, and the prepar...
متن کاملHybrids of Polystyrene-b-Poly(ethylene-ran-butylene)-b- Polystyrene Reinforced by Electrospun Polyimide/ Carbon Nanotube Nanofibers: Preparation and Properties
Using electrospinning technique, well-aligned poly(azo-ether-imide) (PAEI) nano-fibers and PAEI/multiwalled carbon nanotube (MWCNT) nano-fibers were developed in this effort. Afterwards, polystyrene-b-poly (ethylene-ran-butylene)-b-polystyrene (SEBS) and polyimide-based nano-fiber films were casted. The as-prepared electrospun nanofibers acted as homogeneous reinforcement to enhance the tensile...
متن کاملPolystyrene-Polylactide Bottlebrush Block Copolymer at the Air/Water Interface
Hydrophobic ultrahigh molecular weight bottlebrush block copolymer and linear block copolymer of polystyrene-polylactide (PS-PLA) were shown to be capable of forming Langmuir monolayers and exhibiting unique assembly behaviors at the air/water interface, which cannot be addressed by the classic theory of Langmuir monolayer of amphiphilic copolymers. New models were proposed to illustrate these ...
متن کاملPolyoxometalate-modulated self-assembly of polystyrene-block-poly(4-vinylpyridine).
Polyoxometalates can serve as active components to induce and modulate the micellization behavior of polystyrene-block-poly(4-vinylpyridine).
متن کاملPolystyrene/wood composites and hydrophobic wood coatings from water-based hydrophilic-hydrophobic block copolymers
D. J. Gardner Department of Forest Management and Advanced Engineered Wood Composites Center, University of Maine, Orono, ME 04469, USA Abstract The combination of synthetic thermoplastic polymers and wood is normally problematic because wood surfaces are hydrophilic while typical thermoplastic polymers are hydrophobic. A possible solution is to use block copolymer coupling agents. In this work...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Testing
سال: 2016
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2016.03.009