Tailored for simplicity: creating high porosity, high performance bio-based macroporous polymers from foam templates
نویسندگان
چکیده
منابع مشابه
Highly permeable macroporous polymers synthesized from pickering medium and high internal phase emulsion templates.
Effect of additives on the pore structure of polymer foams obtained from Pickering HIPE templates Various routes were investigated to create pore throats in closed-celled poly-Pickering-HIPEs; we tried to dissolve the silica particles used as emulsifiers out of the thin films separating individual pores by adding NaOH into the aqueous phase, which resulted indeed in the formation of interconnec...
متن کاملMacroporous biphasic calcium phosphate scaffold with high permeability/porosity ratio.
Macroporous biphasic calcium phosphate (BCP) with channel-shaped pores was produced by a novel dual-phase mixing method. The processing route includes mixing water-based BCP slurry and polymethylmethacrylate resin; shaping in a mold; and polymerization, drying, pyrolyzing, and sintering. After comparison with two other commercial macroporous BCP materials, which were produced along different ro...
متن کاملHigh porosity polyethylene aerogels
Monolithic aerogels of high molecular weight polyethylene (Mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. These low density and highly porous aerogels present an apparent porosity up to 90%. The aerogel morphology observed by scanning electron microscopy (SEM) is characterized by spherulitic stru...
متن کامل3D macroporous electrode and high-performance in lithium-ion batteries using SnO2 coated on Cu foam
A three-dimensional porous architecture makes an attractive electrode structure, as it has an intrinsic structural integrity and an ability to buffer stress in lithium-ion batteries caused by the large volume changes in high-capacity anode materials during cycling. Here we report the first demonstration of a SnO2-coated macroporous Cu foam anode by employing a facile and scalable combination of...
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Green Chem.
سال: 2014
ISSN: 1463-9262,1463-9270
DOI: 10.1039/c3gc41807c