منابع مشابه
Finite element analysis of tailor-welded blanks
A typical tailor-welded blank (TWB) is composed of several base metals, which might have di!erent mechanical properties as well as thickness. Moreover, a TWB contains a heat-a!ected zone (HAZ) which has quite di!erent mechanical properties from base materials. The forming behaviors of TWBs have been widely studied since they were "rst developed as a way of using collectible o!al. They are often...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملMechanical Properties Improvement of Laser Tailor Welded Blanks of DP600 Steel by Magnetic Treatment
Yanli Song 1,2,3,*, Cheng Yu 1,2,3, Hailong Yu 3 and Chenyu Zhao 3 1 Hubei Key Laboratory of Advanced Technology of Automotive Parts, Wuhan University of Technology, Wuhan 430070, China; [email protected] 2 Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070, China 3 School of Automotive Engineering, Wuhan University of T...
متن کاملPrediction of Tensile and Deep Drawing Behaviour of Aluminium Tailor-Welded Blanks
Tailor-welded blanks (TWB) are blanks with sheets of similar or dissimilar thicknesses, materials, coatings welded in a single plane before forming. Applications of TWB include car door inner panel, deck lids, bumper, side frame rails etc. in automotive sector (Kusuda et al., 1997; Pallet & Lark, 2001). Aluminium TWBs are widely used in automotive industries because of their great benefits in r...
متن کاملAn Analytical Model to Predict Elongation of Tailor Welded Blanks [TWB]
Tailor Welded Blanks (TWBs) made of dissimilar, uniform or non uniform thickness materials have potential applications in automobile industries for light weight materials in order to improve fuel efficiency and cost of carrier. The focus of this paper is to develop and present analytical model to determine total elongation of tailor welded blank (TWBs). The validation of this method is done by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2015
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2015.0414016