Systematic micro heat sink optimization based on hydrofoil shape pin fins
نویسندگان
چکیده
منابع مشابه
Numerical Optimization of Pin-Fin Heat Sink with Forced Cooling
This study presents the numerical simulation of optimum pin-fin heat sink with air impinging cooling by using Taguchi method. 9 L ( 4 3 ) orthogonal array is selected as a plan for the four design-parameters with three levels. The governing equations are discretized by using the control-volume-based-finite-difference method with a power-law scheme on the non-uniform staggered grid. We solved th...
متن کاملFlow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel
Flow boiling of 1-methoxyheptafluoropropane (HFE 7000) in 222 m hydraulic diameter channels containing a single row of 24 inline 100 m pin fins was studied for mass fluxes from 350 kg /m2 s to 827 kg /m2 s and wall heat fluxes from 10 W /cm2 to 110 W /cm2. Flow visualization revealed the existence of isolated bubbles, bubbles interacting, multiple flow, and annular flow. The observed flow patte...
متن کاملNumerical optimization of a PCM-based heat sink with internal fins
This study presents an optimization procedure for the design of a Latent Heat Thermal Management System (LHTMS), used for cooling an electronic device with transient and high heat generation. The LHTMS consists of Phase Change Material (PCM) combined with internal fins, which are used for creating high conductive paths into the PCM. The optimization is performed with a sole aim of minimizing th...
متن کاملHeat transfer enhancement from micro pin fins subjected to an impinging jet
An experimental investigation was carried out to study the single-phase stagnation point jet impingement heat transfer on smooth and micro pin fin structures using water and R134a. The experiments were carried out for a single jet (dj = 2.0 mm) impinging on a 2 2 mm micro-heater over a wide range of Reynolds numbers. Both an unfinned and a micro structured impingement surfaces were investigated...
متن کاملFlow boiling of water in a circular staggered micro-pin fin heat sink
Flow boiling of water across a bank of circular staggered micro-pin fins, 250 lm long and 100 lm diameter with pitch-to-diameter ratio of 1.5, was experimentally studied for mass fluxes ranging from 346 kg/m s to 794 kg/m s and surface heat fluxes ranging from 20 W/cm to 350 W/cm. Local temperature measurements were used to elucidate the two-phase heat transfer coefficients. The flow was visual...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Case Studies in Thermal Engineering
سال: 2021
ISSN: 2214-157X
DOI: 10.1016/j.csite.2021.101028