Synthetic fuel production from shredded scrap waste

Production of Synthetic Fluorspar from Waste Calcium Fluoride Slurry

Synthetic fluorspar can be produced from waste calcium fluoride slurry settled on dumpsites located near Cracow centre. Synthetic fluorspar exchanges natural raw material used in the metallurgical industry. To obtain grained synthetic fluorspar, calcium fluoride slurry should be calcinated in rotary kilns at temperatures of 900-1100K. Grain size and compression strength strongly depends on calc...

Scrap prices, waste and recycling policy

This study examines the effect of waste and recycling policy on scrap prices and the importance of scrap price feedbacks as a determinate of the costs of waste and recycling policy. The effects of a deposit/refund, advance disposal fee, and recycling subsidies on scrap prices are derived, and the direct and indirect channels of waste reduction are decomposed for the three instruments. Scrap pri...

Evaluating of Refuse Derived Fuel (RDF) Production from Municipal Solid Waste (Case Study: Qazvin Province)

Considering increasing population growth in recent decades, and consequently, the increase in waste production in the world, waste management and efforts to reduce their harm to the environment has become an important issue. One of the appropriate ways to manage municipal waste is to generate energy from waste, especially by RDF production method. On the other hand, in order to reduce the consu...

Fuel-oils from co-pyrolysis of scrap tyres with coal and a bituminous waste. Influence of oven configuration

Two wastes from the tyre recycling industry -the fibres used as reinforcing material and tyre crumbswere pyrolyzed in two ovens of different configuration. Blends with a low rank coal and a bituminous waste were also prepared to modify the composition of the oils obtained from the pyrolysis of the tyre wastes. Elemental analysis, calorific value, Fourier transform infrared spectroscopy (FTIR) a...

Scrap Tire Derived Fuel: Markets and Issues