Synthesis of SiC matrix in ceramic matrix composite from Gaseous SiO using Ni

نویسندگان

چکیده

Silicon carbide (SiC) can be synthesized from gaseous silicon monoxide (SiO) and toluene vapor in the presence of a nickel (Ni) component, form Ni or oxide at temperature 1400 °C with very high catalytic activation. With aid effect, SiC formed continuously supplied SiO such that: fibrous is free space containing component having particle size several micrometers; dense body powder compact carried particularly, matrix between filaments fabric when placed within fabric. The latter two cases are believed due to formation embed small spaces particles positions spread substantially over entire surface particles, which outer far blocking since not surface. Accordingly, this study proposes novel chemical infiltration process for creating ceramic composite.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite

In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite J. Ramirez-Rico,a,b,⇑ F. Stolzenburg, J.D. Almer, J.L. Routbort, D. Singh and K.T. Faber Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208, USA Dpto. Fı́sica de la Materia Condensada – ICMS, Universidad de Sevilla – CSIC, 41012 Sevilla, Spain Argonne National ...

متن کامل

Fatigue Damage and Lifetime of SiC/SiC Ceramic-Matrix Composite under Cyclic Loading at Elevated Temperatures

In this paper, the fatigue damage and lifetime of 2D SiC/SiC ceramic-matrix composites (CMCs) under cyclic fatigue loading at 750, 1000, 1100, 1200 and 1300 °C in air and in steam atmosphere have been investigated. The damage evolution versus applied cycles of 2D SiC/SiC composites were analyzed using fatigue hysteresis dissipated energy, fatigue hysteresis modulus, fatigue peak strain and inte...

متن کامل

Measurement of elastic moduli of porous SiC/SiC ceramic matrix composites using ultrasonics

Forced Chemical Vapor Infiltration (FCVI) method was used in fabricating the Nicalon TM!Silicon Carbide composites. Both through-thickness and In-plane (fiber fabric plane) moduli were determined using ultrasonic techniques. The through-thickness moduli were found to be much less than the inplane moduli. Both in-plane and through-thickness moduli were significantly decreased with an increased p...

متن کامل

Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites

In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...

متن کامل

Infrared Thermal Wave Nondestructive Testing for Cf /SiC Ceramic Matrix Composite

In this paper the principle and experimental process of the infrared thermal wave nondestructive testing (NDT) on carbon fiber reinforced silicon carbide (Cf /SiC) ceramic matrix composite sample are demonstrated. The experiment results compared with X-ray testing results show that the infrared thermal wave NDT is an effective method for the Cf /SiC ceramic matrix composite, and it can be used ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Ceramic Society of Japan

سال: 2022

ISSN: ['1882-0743', '1348-6535']

DOI: https://doi.org/10.2109/jcersj2.22028