Synthesis of nickel oxide nanoparticles by Sol-gel method
نویسندگان
چکیده
Nickel oxide NPs are widely recognized as excellent photocatalysts due to their unique optical features such bandgap energy, retention time, strong light absorption, electron-hole recombination duration, and significant negative oxidation potential of excited electrons. NiO nanoparticles were successfully created using a combination nickel hexahydrate precursor, ethanol, distilled water. was employed precursor create (NO3).6H2O, water, stirring until solution homogeneity used make alkaline sodium hydroxide, the into homogenous on magnetic stirrer at 75 °C. A thick green produced pH=12.The surface morphology nanoparticle size as-prepared estimated SEM AFM images spherical particles with sizes about 26.80 nm 37.96 nm. The cubic crystal structure disclosed X-ray Diffraction (XRD). NP absorption spectra in UV visible rangesShow blue has maximum wavelength 341 band is seen 627 Fourier transform infrared (FTIR) spectroscopy.
منابع مشابه
Synthesis of zirconium carbide nanoparticles by sol-gel method and determination of powder characteristics
In this study, zirconium carbide nanoparticles were synthesized by the sol-gel method in the alcoholic system. The sol was prepared in a three-component alkoxide-water-alcohol system based on the chemical sol-gel process under acidic conditions and at pH = 5. Zirconium n-propoxide, furfuryl alcohol were used as raw materials. After the hydrolysis process and formation of the gel, the initial po...
متن کاملThermoluminescece properties of BeO:Mg nanoparticles produced by sol-gel method
Beryllium oxide (BeO) nanopowder was synthesized using sol-gel method and the effects of changes of chemical reagents were investigated. Because of tissue equivalence and other outstanding thermoluminescence (TL) properties of the bulk material in X and γ dosimetry, the applicability of this nanostructure in TL dosimetry was studied following irradiation to the 137 C...
متن کاملSynthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
متن کاملPreparation and Characterization of Nickel and Copper Ferrite Nanoparticles by Sol-Gel Auto-Combustion Method
Ferrites with spinel structure are the most widespread materials in radio engineering, electronics and communication industry, microwave devices and computer facilities. The change of synthesis temperature of ferrites results in cation redistribution of iron, which updates crystal properties, as macroscopic magnetic properties of ferrites. Among this extensive class of compounds nickel and copp...
متن کاملSynthesis and Characterizations of Silica Nanoparticles by a New Sol-Gel Method
Silica nanoparticles were synthesized by chemical methods from tetraethylorthosilicate (TEOS), polyethylene glycol 5% and hydrochloric acid 0.001 N. The sol-gel process was applied for the preparation of nano silica gel. This method is hydrolysis and condensation reactions of TEOS as precursor of silica. The optimal synthesis conditions for the preparation of silica nanoparticles were obtained ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Health Sciences (IJHS)
سال: 2022
ISSN: ['2550-6978', '2550-696X']
DOI: https://doi.org/10.53730/ijhs.v6ns7.13692