SYNTHESIS OF MAGNETIC ACTIVATED CARBONS FROM INDUSTRIAL WASTE

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface Area Determination of Activated Carbons Produced from Waste Tires Using Adsorption from Solution

The following study demonstrates the possibility of producing different activated carbons from a mixture of waste tires and tubes. The mixture was pyrolyzed at different temperatures namely (400,450 and 500 о C) for two hours for the determination of best condition of heating. It was found through the study that semi carbonized marital produced via pyrolyis at 500 о C was the best; thus it was ...

متن کامل

synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants

we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.

15 صفحه اول

Adsorption of acid dye onto activated carbons prepared from agricultural waste bagasse by ZnCl2 activation.

A series of activated carbons were prepared from agricultural waste sugarcane bagasse by chemical activation with zinc chloride (ZnCl2) as an activating agent at 500 degrees C and 0.5 h soaking time. The Langmuir surface area and total pore volume were used to estimate the average pore diameter of the carbon products. The values of the surface area and pore volume increased linearly with increa...

متن کامل

Synthesis of Novel Magnetic Biochar Using Microwave Heating for Removal of Arsenic from Waste Water

Novel magnetic biochar has been successfully synthesized by using microwave technique, using discarded materials such as Empty Fruit Bunch (EFB). The optimized conditions for the best novel magnetic biochar synthesis are at 900 w reaction power, 20 min reaction time, and impregnation ratio 0.5 (biomas:FeCl3) The details physical and chemical analyses of novel magnetic biochar wer...

متن کامل

Synthesis of carbon nanotubes and porous carbons from printed circuit board waste pyrolysis oil.

The possibility and feasibility of using pyrolysis oil from printed circuit board (PCB) waste as a precursor for advanced carbonaceous materials is presented. The PCB waste was first pyrolyzed in a laboratory scale fixed bed reactor at 600 degrees C to prepare pyrolysis oil. The analysis of pyrolysis oil by gas chromatography-mass spectroscopy indicated that it contained a very high proportion ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Latin American Applied Research - An international journal

سال: 2019

ISSN: 1851-8796,0327-0793

DOI: 10.52292/j.laar.2019.363