Synthesis of Co–TiO2 nanostructured photocatalytic coatings for MDF substrates
نویسندگان
چکیده
منابع مشابه
Degradation of NO using photocatalytic coatings applied to different substrates
This article deals with the degradation of NO present in the air by means of a photocatalytic oxidation process based on TiO2 nanoparticles incorporated in a polymer-matrix-based coating. The experimental set-up consisted of a flow type reactor adapted from the ISO 22197-1 standard. NO2 in the gas phase, and nitrate ions adsorbed on the photocatalytic surface were detected as finals products. V...
متن کاملKinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process
Sol-gel process was chosen to produce a photocatalytic film to degrade methylene blue. In order to study structural and morphological properties of the coatings, a base sol of TTIP, I-PrOH, and DEA was prepared. Then with addition of 45g/L PEG 2000, 30g/L TiO2 and 15g/L PEG 2000 + 30g/L TiO2, to the base sol, three other sols were produced. The results of this study indica...
متن کاملElectrodeposition of Nanostructured Magnesium Coatings
In this work, we report on the electroplating of ultrafine and uniform magnesium (Mg) films on copper (Cu) and carbon nanotube (CNT) paper substrates. By controlling the process parameters and utilizing the pulsed deposition method, the average grain size of Mg was reduced to nanodimensions. Surface pretreatment of the substrates by depositing a seed layer was found to be an efficient strategy ...
متن کاملNanostructured Substrates for Optical Sensing.
Sensors that change color have the advantages of versatility, ease of use, high sensitivity, and low cost. The recent development of optically based chemical sensing platforms has increasingly employed substrates manufactured with advanced processing or fabrication techniques to provide precise control over shape and morphology of the sensor micro- and nano-structure. New sensors have resulted ...
متن کاملFacile Synthesis of Photofunctional Nanolayer Coatings on Titanium Substrates
We developed a two-step chemical bonding process using photosensitizer molecules to fabricate photofunctional nanolayer coatings on hematoporphyrin- (HP-) coated Ti substrates. In the first step, 3-aminopropyltriethoxysilane was covalently functionalized onto the surface of the Ti substrates to provide heterogeneous sites for immobilizing the HP molecules. Then, HP molecules with carboxyl group...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Green Materials
سال: 2016
ISSN: 2049-1220,2049-1239
DOI: 10.1680/jgrma.16.00004