Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions
نویسندگان
چکیده
منابع مشابه
Synthesis and Cure Kinetics of Liquefied Wood/Phenol/ Formaldehyde Resins
Wood liquefaction was conducted at a 2/1 phenol/wood ratio in two different reactors: (1) an atmospheric three-necked flask reactor and (2) a sealed Parr reactor. The liquefied wood mixture (liquefied wood, unreacted phenol, and wood residue) was further condensed with formaldehyde under acidic conditions to synthesize two novolac-type liquefied wood/phenol/formaldehyde (LWPF) resins: LWPF1 (th...
متن کاملSynthesis and Thermal Degradation Studies of Melamine Formaldehyde Resins
Melamine formaldehyde (MF) resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA). The maximum percentage of solid content (69.7%) was obt...
متن کاملUrea-formaldehyde Adhesive Resins*
Approximately 1 million metric tons of urea-formal-dehyde resin are produced annually. More than 70% of this urea-formaldehyde resin is used by the forest products in-*This information was written and prepared by a U.S. Government employee on official time and it is, therefore, in the public domain and not subject to copyright.
متن کاملCharacterization of Phenol-Formaldehyde Resins Modified with Crude Bio-oil Prepared from Ziziphus mauritiana Endocarps
This study was conducted to evaluate the effects of bio-oil incorporation on properties of bio-oil-phenol formaldehyde (BPF) resol resins along with the optimization of petro-phenol substitution level. Crude bio-oil prepared from endocarp shells of Ziziphus mauritiana by direct solvolytic liquefaction (ethanol-water 1:1 wt./wt. at 300 °C) was used to partially substitute the petro-phenol (30% t...
متن کاملUse of Lignin Separated from Bio-oil in Oriented Strand Board Binder Phenol-formaldehyde Resins
Bio-oil produced from fast pyrolysis of biomass has been investigated as a renewable fuel and as a source of industrial chemicals. The lignin fraction of bio-oil produced from wood in our fast pyrolysis reactor was separated by using only water and methanol with a 25% yield based on bio-oil weight. This separation procedure appears to be of lower cost than the reported extraction procedure usin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Drvna industrija
سال: 2020
ISSN: 1847-1153,0012-6772
DOI: 10.5552/drvind.2020.1848