Synthesis of Amorphous Matrix Nano-composite in Al-Cu-Mg Alloy

CORROSION BEHAVIOUR OF Al-Li-Cu-Mg ALLOY 8090-T651

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY

The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...

A novel Al matrix composite reinforced by nano-AlNp network

In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are co...

THREE DIMENSIONAL ATOM PROBE ANALYSIS OF PRE-PRECIPITATE CLUSTERING IN AN Al-Cu-Mg-Ag ALLOY

Trace element additions in age hardening aluminum alloys often modify precipitation products and kinetics. In the case of Al-Cu alloy, combined addition of trace amount of Mg and Ag leads to precipitation of fine and uniform dispersions of plate-like Ω phase on the {111}Al planes in addition to the θ′ precipitates on the {001}Al planes [1,2]. The Ω phase shows high thermal stability and resista...

Dsc Study of Precipitation in an Al-mg-mn Alloy Microalloyed with Cu

Power compensation DSC has been employed to detect and analyse precipitation reactions in an Al1.3Mg-0.4Mn and an Al-1.3Mg-0.4Mn-0.07Cu alloy in which very small amounts of precipitate, less than 0.3 at%, are expected to form. Due to the very small heat effects, baseline instability and drift significantly interfere with the measurements. After repeated experiments and careful baseline correcti...