Synthesis and properties of a nonionic water-based epoxy curing agent
نویسندگان
چکیده
Owing to the requirement for environmental protection, water-based coatings have become a significant trend in development of coatings. The epoxy curing agent has also hot research topic. In this study, B-A-B compound with long hydrophobic alkyl chain connected intermediate nitrogen atom was synthesized at both ends molecule using ethylene glycol diglycidyl ether and 3,4-dimethoxyaniline as raw materials. Subsequently, sealed triethylenetetramine. A nonionic, resin amino groups prepared. target product structure confirmed by infrared spectroscopy (IR), Mass spectrum (MS), Nuclear magnetic resonance hydrogen ( 1 H-NMR). Additionally, through three factors levels orthogonal experimental design, optimum conditions were confirmed, yield 82.83%. thermogravimetric analysis (TGA) indicated that monomer exhibited weight loss temperature range 320–450°C. pencil hardness, flexibility, impact resistance waterborne coating film prepared non-ionic reached or exceeded those similar products China foreign countries.
منابع مشابه
Catalyzed Synthesis and Characterization of a Novel Lignin-Based Curing Agent for the Curing of High-Performance Epoxy Resin
In this study, lignin, an aromatic compound from the forestry industry, was used as a renewable material to synthesize a new aromatic amine curing agent for epoxy resin. Firstly, lignin was separated from black liquor and hydroxyl groups were converted to tosyl groups as leaving groups. Then, primary amination was conducted using an ammonia solution at high pressure and temperature, in the pres...
متن کاملSynthesis and Characterization of a Nonionic Urethane-Based Thickener
Hydrophobically modified ethoxylated urethanes have been synthesized using polyethylene glycol, hexamethylene diisocyanate and cetyl alcohol. These types of thickeners are categorized as nonionic associative thickeners. The HEURs were prepared in two steps. Initially an ethoxylated urethane prepolymer was synthesized through a reaction between a polyethylene glycol (Mn=6000) and hexamethylene d...
متن کاملStudy the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers
The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured film...
متن کاملOptimization of thermal curing cycle for a large epoxy model
Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...
متن کاملProperties and curing kinetics of C21-based reactive polyamides as epoxy-curing agents derived from tung oil
Three C21-based reactive polyamides were synthesized from tung oil and different polyamines. The thermal and mechanical properties of cured products of the C21-based polyamides and diglycidyl ether of bisphenol A (DGEBA) were investigated. It was found that the cured materials were superior to those cured by C36-based polyamides in tensile strength and flexural strength and had a better flexura...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers & Polymer Composites
سال: 2023
ISSN: ['1478-2391', '0967-3911']
DOI: https://doi.org/10.1177/09673911231201049