Synthesis and Characterization of α-Fe2O3 Nanoparticles Using the Precipitation and Eco-Friendly Methods
نویسندگان
چکیده
Iron oxide (α-Fe2O3) nanoparticles were fabricated by chemical precipitation and Eco-Friendly routes, using Capparis Spinosa leaves extract, sodium hydroxide iron sulphate heptahydrous. The calcination temperature for α-Fe2O3 was at 600 °C. All prepared samples investigated different physical methods such as XRD, FT-IR, FESEM, EDX DLS. XRD analysis confirmed that all the consist only hematite phase with size of 31.95 nm 26.92 method respectively. in FESEM image showed a spherical nanoparticle structure. results presented elements content (Fe = 64.3, O= 24.6) green synthesis 66.3, 29.3) through method. distribution via greater compared to according DLS analysis.
منابع مشابه
Synthesis and Characterization of α-Fe2O3 Nanoparticles by Simple Co-Precipitation Method
In the past decade, magnetic nanomaterials have attracted much attention due to their physical properties and technological applications. In this work, α-Fe2O3 nanoparticles were first synthesized via a simple co-precipitation method using iron chloride hexahydrate (FeCl3.6H2O) as precursor and ammonia solution as precipitator. The samples we...
متن کاملSynthesis and Characterization of α-Fe2O3 Nanoparticles by Microwave Method
α-Fe2O3 (hematite) is the most stable iron oxide under ambient conditions. This transition metal oxide has been extensively investigated because it has unique electrical and catalytic properties. In this report, a novel microwave method for preparation of α-Fe2O3 nanoparticles has been developed. The process contained two steps: first, precursor were obtained from a mixed solution of 50 ml of 0...
متن کاملEco-friendly synthesis and characterization of α-Fe2O3 nanoparticles and study of their photocatalytic activity for degradation of Congo red dye
In this work, α-Fe2O3 (hematite) nanoparticles were synthesized using Arabic gum (AG) as a biotemplate source by the sol-gel method. This method has many advantages such as low-cost, nontoxicity, simple work-up, high efficiency, compounds uniformity, and high efficiency. The α-Fe2O3 nanoparticles were characterized by Fourier transform infrared (FT-IR...
متن کاملsynthesis and characterization of α-fe2o3 nanoparticles by microwave method
α-fe2o3 (hematite) is the most stable iron oxide under ambient conditions. this transition metal oxide has been extensively investigated because it has unique electrical and catalytic properties. in this report, a novel microwave method for preparation of α-fe2o3 nanoparticles has been developed. the process contained two steps: first, precursor were obtained from a mixed solution of 50 ml of 0...
متن کاملsynthesis and characterization of α-fe2o3 nanoparticles by simple co-precipitation method
in the past decade, magnetic nanomaterials have attracted much attention due to their physical properties and technological applications. in this work, α-fe2o3 nanoparticles were first synthesized via a simple co-precipitation method using iron chloride hexahydrate (fecl3.6h2o) as precursor and ammonia solution as precipitator. the samples were then characterized by high resolution transmission...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Pharmaceutical Negative Results
سال: 2022
ISSN: ['0976-9234', '2229-7723']
DOI: https://doi.org/10.47750/pnr.2022.13.04.104