Swirling Flow Submerged Entry Nozzle for Round Billet Casting

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

SUBMERGED ENTRY NOZZLE CLOGGING DURING CONTINUOUS CASTING OF Al-KILLED STEEL

F. Tehovnik, J. Burja, B. Arh, Institute of metals and technology, Ljubljana, Slovenia, M. Knap, University of Ljubljana, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia Nozzle clogging is a common problem in the production of continuously cast Al-killed steels. Clogging occurs when there are solid inclusions in molten steel at casting temperatures. SENs (Submerged entry nozzle...

متن کامل

The Effects of a Submerged Entry Nozzle on Flow and Initial Solidification in a Continuous Casting Bloom Mold with Electromagnetic Stirring

The melt flow, level fluctuation, temperature field, and solidification behavior coupled with electromagnetic stirring (EMS) effects in the continuous casting mold region of U71Mn steel bloom were numerically analyzed by commercial computational fluid dynamics (CFD) software named ANSYS FLUENT. The effects of submerged entry nozzle (SEN) structures and the installation methods for optimized fou...

متن کامل

Mathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet

The method of continuous casting of steel is now often used in the metallurgical industry, due to the increasing demand for the production of high – quality steel. An important device of continuous casting machine is the tundish, in which a stabilized steel flow has a crucial effect on the quality and efficiency conditions of the continuous casting process. In this study fluid flows in a six – ...

متن کامل

Investigation the effects of injection pressure and compressibility and nozzle entry in diesel injector nozzle’s flow

Investigating nozzle’s orifice flow is challenging both experimentally and theoretically. This paper focuses on simulating flow inside diesel injector nozzle via Ansys fluent v15. Validation is performed with experimental results from Winkhofler et al (2001). Several important parameters such as mass flow rate, velocity profiles and pressure profiles are used for this validation. Results includ...

متن کامل

Physical Modeling of Steel Delivery during Thin Slab Continuous Casting

A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Tetsu-to-Hagane

سال: 2007

ISSN: 0021-1575,1883-2954

DOI: 10.2355/tetsutohagane.93.575