Swelling and Adsorption Properties of Microfibrillated Cellulose.

Biomimetic Aerogels from Microfibrillated Cellulose and Xyloglucan

Aerogels refer to a new class of materials holding air in their structure. They are highly porous solids having a large inner surface area. They are extremely light, low heat conductive, and high sound absorbent materials. Therefore, aerogels have excellent performance in applications such as heat insulators, particle filters, particle trappers, and catalyst carriers 1 . Aerogels are prepared s...

Functional Polymer Nanocomposite Materials from Microfibrillated Cellulose

Nanopaper Properties and Adhesive Performance of Microfibrillated Cellulose from Different (Ligno-)Cellulosic Raw Materials

The self-adhesive potential of nanocellulose from aqueous cellulosic suspensions is of interest with regard to a potential replacement of synthetic adhesives. In order to evaluate the performance of microfibrillated cellulose from different (ligno-)cellulosic raw materials for this purpose, softwood and hardwood powder were fibrillated and compared to sugar beet pulp as a representative non-woo...

Effect of Pulp Concentration during Cellulase Pretreatment on Microfibrillated Cellulose and Its Film Properties

Pulp concentration was increased, during preparation of microfibrillated cellulose (MFC), in an effort to improve the efficiency of cellulase pretreatment. It was hypothesized that increased pulp concentration could possibly increase the interactions between cellulase and cellulose, therefore improving the cellulase pretreatment efficiency and benefiting MFC and its film properties. Results sho...

Water Vapor Barrier Properties of Coated and Filled Microfibrillated Cellulose Composite Films

Microfibrillated celluloses (MFCs) have mechanical properties sufficient for packaging applications but lack water vapor barrier properties in comparison to petroleum-based plastics. These properties can be modified by the use of mineral fillers, added within the film structure, or waxes, as surface coatings. In this investigation it was determined that addition of fillers resulted in films wit...